INDUSTRIAL ANTI-GRAFFITI COATINGS

Product Overview

We offer anti-graffiti protective coatings and removers for graffiti paint as well as chemical cleaning preparations for elevations and acoustic screens which are heavily polluted due to atmospheric and industrial factors. All the products have been tested thoroughly to meet all the clients’ expectations.
We also offer professional counselling and assistance with regard to selection of appropriate chemical preparations.

 

 Anti-graffiti Coatings (Anti-graffiti Professional System)

KTX 05

Sacrificial coating

The product is based on microcrystalline waxes. It protects the surface against spray paints, water-based markers, ink, atmospheric pollution, acid rain and moisture.  Used for protection of absorbent and unabsorbent substrates, both smooth and porous, such as sand-lime bricks, ordinary bricks, plaster, concrete, sandstone, paint coatings, steel, aluminium, plastics, ceramics, wood as well as sculptures, monuments and thermal insulating systems. Durability: 7 years.
Technical Approval IBDiM-KOT-2022/0841.

KTX 05 strong

Sacrificial coating

Product is based on concentrated microcrystalline waxes. It protects the surface against spray paints, water-based markers, atmospheric pollution, dirt, acid rain and moisture. It is applied as a single coating, using “wet on wet” method. Used for protection of both smooth and porous substrates, such as sand-lime bricks, ordinary bricks, clinker, plaster, concrete, sandstone, granite or travertine, as well as sculptures, monuments, thermal insulating systems and paint coatings. Durability: 5 years.

KTX 07

permanent coating SYNTHETIC
glossy/matte/coloured

A single-component, synthetic anti-graffiti coating which cures under the influence of moisture. It protects the surface against spray paints, most markers, ink, bird droppings, dirt, acid rain, moisture and chewing gum. Applicable as anti-poster coating. Applied in two layers. Used for protection of substrates such as paint coatings, concrete, sandstone, brick, steel, aluminium, plastics. Does not prevent water vapour diffusion. Facilitates multiple removals of graffiti using only water – up to 100 cleaning cycles. Durability: 20 years.
Technical Approval IBDiM-KOT-2022/0841.

KTX 20

Permanent coating
POLYMER
Glossy

Single-component polymer coating, transparent after drying. The product is used for protection of smooth unabsorbent substrates like polyurethane or epoxy coatings, varnish coatings, plastics, polycarbonates, glass, steel, aluminium. Applicable on the inside and outside surfaces of buses, trams, trains as well as parking meters and ticket vending machines. Due to its exquisite transparency, it is recommended for use on acoustic screens made of polycarbonates and similar materials. If the surface of glass (or polycarbonate, Plexiglas etc.) is damaged, matted or oxidised, the coating restores the material’s natural lustre. The coating protects the substrate against graffiti spray paint, water-based markers, ink, bird droppings and atmospheric pollution. Applicable as anti-poster coating. Applied in one layer. Multiple removals of graffiti paint. Durability: 20 years.

KTX 30

Permanent
ISOMORPHIC
neutral

Single-component, isomorphic coating, transparent after drying. Used for protection of glass, steel and ceramics. Due to its exquisite transparency, it is recommended for use on glass surfaces. The product has anti-static properties. It protects surfaces against graffiti spray paints, markers, ink, acid rain, alkalis and atmospheric pollution. Applied in one layer. Multiple graffiti removal. Durability: min. 10 years.
Technical Approval IBDiM-KOT-2020/0551.

 

Anti-poster coatings

KTX
Anti-poster
A single-component coating for surface protection against posters, stickers and adhesive tape. The coating is applied in two layers. It is suitable for use on substrates such as paint coatings, concrete, brick, plastics, metals etc. It is perfect for protection of urban infrastructure elements like traffic light posts, road signs, lamp posts, bus shelters as well as benches, electricity or telecom boxes. The coating efficiently prevents the glue from binding with the surface, which enables effortless removal of the glued material. The substrate is also protected from the use of graffiti spray paints, water-based markers, dirt, acid rain, moisture, bird droppings and chewing gum. The coating allows water vapour diffusion. Its durability amounts to 15 years.

 

Primer for anti-graffiti coatings

PX 07 PX 07 is a single-component, colourlessly drying dispersion of styrene-acrylic copolymer. It is used for priming absorbent, mineral substrates before application of anti-graffiti coating, which minimises or prevents the covered surface form darkening. It also enhances and evens out its absorptiveness. The product perfectly penetrates into the surface while improving its adhesive properties thanks to small size dispersion particles. PX 07 allows diffusion, has hydrophobic properties, protects the surface from penetration by hazardous substances and is UV and erosion resistant. 

 

Products for graffiti removal from Anti-graffiti Professional System 

KT 01
liquid
Liquid preparation for use on delicate, smooth, non-absorbent surfaces sensitive to strong solvents. It does not cause the matte effect on the cleaned surface. It is the weakest of all the Anti-graffiti Professional KT Removers line. Applicable on multi-chamber/solid polycarbonate, Plexiglas, laminates, plastics, foils, varnish coatings. Suitable for lifts, toilets, telephone booths, bus shelters, acoustic screens, schools, railway carriages, trams, buses, cars, road signs, advertising foils and boards as well as permanent poly-urethane anti-graffiti coatings.
KT 01+
gel
Gel preparation for use on delicate, smooth and porous non-absorbent surfaces sensitive to strong solvents. It does not cause the matte effect on the cleaned surface. It is the weakest of all the Anti-graffiti Professional KT Removers line. Applicable on multi-chamber/solid polycarbonate, Plexiglas, laminates, plastics, foils, varnish coatings. Suitable for lifts, toilets, telephone booths, bus shelters, acoustic screens, schools, railway carriages, trams, buses, cars, road signs, advertising foils and boards as well as permanent poly-urethane anti-graffiti coatings.
KT 02
liquid
Liquid preparation for use on smooth, non-absorbent surfaces. It is the second weakest of all the Anti-graffiti Professional KT Removers line. Applicable on laminates, plastics, foils, metals, aluminium, glass, ceramics, industrially painted surfaces. Possibly, also applicable on surfaces sensitive to aggressive solvents, such as multi-chamber/solid polycarbonate, after a test trial. Suitable for lifts, toilets, telephone booths, bus shelters, acoustic screens, schools, railway carriages, trams, buses, road signs, advertising foils and boards as well as permanent poly-urethane anti-graffiti coatings.
KT 02+
gel
Gel preparation for use on smooth and porous non-absorbent surfaces. It is the second weakest of all the Anti-graffiti Professional KT Removers line. Applicable on laminates, plastics, foils, metals, aluminium, glass, wood, industrially-painted surfaces, ceramics. May be tentatively used on surfaces sensitive to aggressive solvents, such as multi-chamber/solid polycarbonate, after a test trial. Suitable for lifts, toilets, telephone booths, bus shelters, acoustic screens, schools, on, railway carriages, trams, buses, road signs, advertising foils and boards as well as permanent poly-urethane anti-graffiti coatings.
KT 03
liquid
Liquid preparation for use on smooth non-absorbent surfaces. It is the third in terms of its strength of all the Anti-graffiti Professional KT Removers line. Applicable on laminates, plastics, foils, metals, aluminium, glass, wood, industrially-painted surfaces, ceramics. May be tentatively used on surfaces sensitive to aggressive solvents, such as multi-chamber/solid polycarbonate, after a test trial. Suitable for lifts, toilets, telephone booths, bus shelters, acoustic screens, schools, railway carriages, trams, buses, road signs, advertising foils and boards as well as permanent poly-urethane anti-graffiti coatings.
KT 03+
gel
Gel preparation for use on smooth and porous non-absorbent surfaces. It is the third in terms of its strength of all the Anti-graffiti Professional KT Removers line. Applicable on laminates, plastics, foils, metals, aluminium, glass, wood, industrially-painted surfaces, ceramics. May be tentatively used on surfaces sensitive to aggressive solvents, such as multi-chamber/solid polycarbonate, after a test trial. Suitable for lifts, toilets, telephone booths, bus shelters, acoustic screens, schools, railway carriages, trams, buses, road signs, advertising foils and boards as well as permanent poly-urethane anti-graffiti coatings.
KT 04
liquid
Liquid preparation for use on smooth non-absorbent surfaces resistant to aggressive solvents. It is the fourth in terms of its strength of all the Anti-graffiti Professional KT Removers line. Applicable on steel, glazed brick, glass, ceramics and permanent poly-urethane anti-graffiti coatings in short exposure time. May be cautiously used on plastics.
KT 04+
gel
Gel preparation for use on porous absorbent surfaces resistant to aggressive solvents. It is the fifth in terms of its strength of all the Anti-graffiti Professional KT Removers line. Applicable on brick, glazed brick, cement-bound substrates, plaster, concrete, sandstone, granite, travertine.
KT 04 Strong
gel
Preparation in the form of gel to be used for porous, absorptive and chemically resistant surfaces. KT 04 Strong is the strongest preparation in the range of System Professional anti-graffiti removers.  Intended use: brick, glazed brick, cement-bound substrates, plaster, façade paints, concrete, sandstone, granite, travertine, steel, wood.

 

Thorough cleaning of elevations

KTS 01
gel
A gel preparation for cleaning accumulated, perennial atmospheric dirt. KTS 01 dissolves dirt delicately and effectively on surfaces made of natural stone, like sandstone, granite, travertine, marble, brick, clinker, concrete.
KTE 01
liquid
Alkaline preparation for thorough cleaning of both absorbent and non-absorbent surfaces like concrete, cars, buses, acoustic screens, plastics. It is perfect for removing oil, lubricants, grease and worst traffic dirt. It is efficient on surfaces which have not been cleaned for a long time. Application: 1 to 10%, approx. pH =12.